Arima Hotel (San Sebastian)
November 6 and 7, 2019

Additive manufacturing has been incorporated into landscape of industrial production technologies and we are on the verge of its massive implementation in several industries.

However, the surface quality of the components obtained by additive manufacturing is rather low. Besides that, there is the need to eliminate the supports generated during production. That makes the post-processing stage the real bottleneck of the additive manufacturing process.

The solutions currently used at industrial level need too many manual operations or involve an expense that can mean half of the final cost of the piece.

Finishing parts with complicated geometries in a proper and economical way can be a real challenge. That is why it is very important to know the advantages and limitations of the different technologies in order to select the most suitable for each type of piece and material according to its composition, geometry and functional requirements.

On November 6 and 7, CIDETEC Surface Engineering brings together in San Sebastian the main experts in post-processing technologies for materials produced by additive manufacturing at the PostAdditive 2019 conference. During these two days, the conference will offer a global overview of the latest advances and innovations and the industrial opportunities provided by these technologies.


09:00 - 09:30


09:30 - 10:00


10:00 - 10:30

Opening talk: Global vision of Additive Manufacturing value chain

José Miguel Macho | SIEMENS

10:30 - 11:00

Increasing efficiency and productivity of Additive Manufacturing through implementation of new materials, bionic design and next generation processes

Philipp Imgrund | Fraunhofer IAPT

11:00 - 11:30

Coffee break

11:30 - 12:00

The Additive Manufacturing post-processing value chain, today

María Belén García | CIDETEC Surface Engineering

12:00 - 12:30

Elimination of structures and supports by TEM

Miguel Carraro Delgado | Extrude Hone

12:00 - 12:30

5-axis metrology technology applied on Additive Manufacturing parts

Iñaki de Paz | Renishaw

12:30 - 13:00

Thermal treatments, guaranteeing properties in Additive Manufacturing

Iñigo Iturriza | Ceit

13:00 - 14:00


14:00 - 14:30

Challenges and opportunities associated with the Additive Postprocessing in the aeronautical sector

Gorka Fernández Alzola | Mizar Additive

14:30 - 15:00

Additive Manufacturing machining for aircraft parts

Ione Golvano Escobal | EGILE

15:00 - 15:30

The importance of the Post Process automation in the industrial finishing

Enric Sirera Soler | ABRAST (Grupo CONIEX)

15:30 - 16:00

Coffee break

16:00 - 16:30

Posprocesos en tecnologías de fabricación indirectas: tecnología LCM en cerámica

Guillermo Sánchez Parrondo | IDONIAL

16:30 - 17:00

Influence of the initial stages of the process of Additive Manufacturing in the Postprocessing


17:00 - 17:30

Abrasive Flow Machining and Coolpulse

Mariana Cabrera | Extrude Hone

17:30 - 18:00

CIDETEC visit + Coctel


09:30 - 10:00

DryLyte Technology, the first dry electro-polished system

Pau Sarsanedas Milelt | GPA Innova

10:00 - 10:30

Effect of surface finishing processes on the mechanical behavior of titanium alloys manufactured by SLM

Ane Miren Mancisidor Telleria | LORTEK

10:30 - 11:00

Coffee break

11:00 - 11:30

NDTs superficiales aplicados a Fabricación Aditiva

Pablo López de Uralde y Jorge Rodriguez | LORTEK y CIDETEC Surface Engineering

11:30 - 12:00

NDTs volumétricos aplicados a Fabricación Aditiva

Benjamín Rubio | TECNALIA, Industry & Transport Division

12:30 - 13:00

New trends in the Post-Processing of Additive Manufacturing

José Antonio Díez | CIDETEC Surface Engineering

13:00 - 13:30

Closing remarks

© PostAdditive'19 | Contacto | Politica de privacidad